However I became busy with other things and during that period enough changed on the laptop that I wanted to make a new clone so I wouldn't loose anything. I also got a Crucial adapter to connect the SSD to the laptop via a USB port.Ī month an a half ago I used Reflect to make a clone with no problem. I'm trying to clone my current 1 TB HD so I can replace it with a Crucial MX500 1TB SATA 2.5" SSD I bought for this purpose. I don't think it's a hardware problem, unless of course the actual hard drive is bad, because several times in the past week I've successfully cloned my other drives using the came cables on the same computer.Īt the moment I'm at a loss as to what my next step should be so I would appreciate any suggestion anyone may have.I'm using Macrium Reflect Home Edition on my HP Laptop 17-g161us running Windows 10. My next step was to use Disk Management to delete the partitions on the new 4TB drive then I created a brand new process and tried cloning again. This time near the end of the cloning process it stopped with a clone failed - broken pipe message. It took several hours but it supposedly corrected the errors and after doing so I attempted to clone that same drive again. After I canceled the clone and rebooted Windows 7 reported a massive amount of errors on the new 4TB drive. Last night I configured the clone process, started it, then a little while later I decided to cancel the clone so I could do it overnight (and I suspect this is when the problem happened). I have a new 4TB Western Digital drive (not SSD) that I have been trying to clone to a 3TB WD drive on my Windows 7 machine using the current version of Reflect.
0 kommentar(er)
